|Color and Light||1.1||Do Assignment|
|Color and Light||1.2||Do Assignment||1.3 | 1.4|
|Illusion of Space and Atmosphere||1||Do Assignment|
|Personal Art||1.1||Do Assignment|
i've started using a piece of string to check my measurements after i have eyeballed them. will this help me with being able to just eyeball them?
My Sketchbook http://conceptart.org/forums/showthread.php?t=141148
What are you doing with the string? Putting it on the model?
No need. If you do measuring correctly, you don't have to worry about pinpoint accuracy, because it is a self-correcting method (as long as you keep measuring, and try to get it close each time)
Don't measure on the diagonals! Only measure horizontal and vertical elements, because if you add the extra dimension of angle to the measurement process, it's one more variable you have to manage.
Always make your measurement at arms length (for consistency) with the tip of a skinny stick (like a wooden skewer, or a pencil if you have nothing else).
If you have to measure on your drawing (and you probably will), use a piece of paper with tick marks. Again, horizontals and verticals.
If you're consistent about this approach, it will be like throwing a loose grid of squares around the model, which will "tighten up" slowly as you take more measurements. You'll end up with a very accurate drawing in very little comparative time.
It takes practice, but not too bad before you can do it accurately. Trust me, I know all about the pains of worrying about being "not accurate enough" with measurements. Trust the self-correcting nature of the beast, and it will become much easier.