|Color and Light||1.1||Do Assignment|
|Color and Light||1.2||Do Assignment||1.3 | 1.4|
|Illusion of Space and Atmosphere||1||Do Assignment|
|Personal Art||1.1||Do Assignment|
I tried searching for this link to see if it had already been posted, but the search engine here just returns pretty much every thread in the subsection.
So here it is anyway:
What this guide aids you to do is ditch the dumbdumb pressure settings of the Wacom drivers and make your own manually along a three-point curve.
So for example, though before you could select "Soft" settings, it didn't change the fact that you still had to press super hard to get to that 1024st level of sensitivity.
But by following the guide, you can change these to anything you want, and set the middle point wherever you please. I opted to keep a linear pressure setting, and to reduce the nullified pressure from 40 to 10 so that, just as with real media, if I touch the stylus to the Cintiq super lightly then I get a correspondingly super light line. I don't know for certain whether the "click threshold" setting of Wacom's driver lets me reduce as much as I did; it doesn't seem as if it did.
So now my pressure curve is as follows:
10, 409, 818
which means I only have to use about 80 percent of the same force upon the stylus I was using before to reach full pressure.
Now it's so much easier to play with the whole range. It's really made using the Cintiq feel a lot more natural, and it makes calibration within programs easier too.
Righto, have fun, keep well hydrated, try baking your own pizza it's so much cheaper than buying, exfoliate at least once a week, take it easy, bye.
Last edited by A. Sobriquet; April 7th, 2009 at 08:00 AM.
311002965, AccidentHappy, algenpfleger, ancientdrake, Anid Maro, Arish, Armonah, Arshes Nei, benu, BettyHime, Calamitous Maelstrom, clockworksnail, Costau, courtyard, crdf, Dile_, Djinn, drd, egerie, Elyaradine, ErikHolfelder, GaussianRaider, Gerulaitis, goma14, GregorCZ, Greywoods, GriNGo, Grubber, Hedeon, HunterKiller_, Immy, Jamie Romoser, Jon Sun, Kiera, Kriekira, Kristal Lee, krysjez, Lady Chestnut, link_choi, lkjhgfdsa, MacTire, MrEshovel, Nibras, Nightblue, nonie, Oxide-0, Quike Garcia, razimo, Rita Chan, Samuel Gray, Senira, shaggy, Slash, space, Sung-jae Kim, telohs, Tonic, Truul, vardoburrito, Vatsel, Victor B, Xeon_OND
Worked for me, too. It's pretty silly how editing a simple line changes world of drawing Intuos4 users should be a happier a lot
It's now much more convenient, it's easy to make high pressure strokes, while you still can easily and precisely use low pressure strokes.
But.. anyone has idea why Wacom would remove the feature of adjusting pressure curve?
I am on Windows 7, using a bamboo pen/touch.
There were two tablet-related services running, I stopped "TabletServicePen".
The dat file was located in: C: \Users\
\AppData\Roaming\WTablet and was called "Pen_Tablet.dat". This file can be opened with notepad. Also, an easy way to get to the appdata folder without messing with folder settings is to just go to start>run and type in "%appdata%" and hit enter, or in vista/win7, type "appdata" into the search bar (in the start menu) and hit enter.
My settings for both tip and eraser were:
PressureCurveControlPoint 81 0 512 512 1023 1023
and I changed both to:
PressureCurveControlPoint 22 0 383 511 768 1023
Notice I also changed the threshold numbers. I don't know if what I did was done correctly or not, but now I can get a line going with just the slightest touch! When the threshold was set to 81, I had to press very hard to get a line going even with the adjustments to the other numbers.
EDIT: After restarting the computer, my changes to the upper and lower pressure thresholds had disappeared! I changed them back and restarted 3 more times with the same effect. On the forth restart my changes stayed. Afterwards I went back to my original dat file, downloaded the Pressure Curve Tool, and changed the pressure levels with that. Worked flawlessly and so far my changes have stayed put!
Last edited by Pam_Thompson; June 17th, 2010 at 11:24 PM.
Brilliant, brilliant, brilliant.
I noticed that when I changed that when I alter the click threshold in the driver, it changes some numbers in the property above the pressure setting in the configuration file. Wonder how these work.
EDIT: Ok, those properties I mentioned are the 'UpperPressureThreshold 41' and 'LowerPressureThreshold 33' (those values are the default).
I adjusted the click threshold down to the 2nd notch from the lowest and the values were changed in the configuration to 20 and 12 respectively.
This did not affect the pressure curve. Now my pen is really sensitive.
Last edited by HunterKiller_; April 9th, 2009 at 06:03 AM.
Thank you so much for this post. I also noticed this in addition when browsing Wacom's forums: http://forum.wacom.eu/viewtopic.php?f=2&t=850
There are friction sheets for the intuos3 according to Wacom. So with the tweaking of the drivers and friction sheets you can do some nice updates to the intuos3 line.
Last edited by Tonic; April 11th, 2009 at 10:56 AM.
I used my tablet on a slightly firm setting and this was still really helpful.
If you use Photoshop a lot, you'll want to do this tweak, since PS doesn't have brush pressure adjustment.
Brashen, not necessarily, you can set in reversed way - harder presses for low pressure brush strokes.
HunterKiller, are there graphic programs that allows to adjust pressure?
But apparently Adobe doesn't care about us enough to implement such a simple feature.
hands down the most mindblowing thing on this entire website..
someone needs to sticky this.
Theoretically speaking I would say it's possible for a mac. Is there something similar to a /users/application data/ structure on Mac?
Is there a Wtablet folder?
I would think it would be something labeled like "wacom_Tablet"
Now the only thing I don't know is how you would stop a "service" on a mac and restart it.
Ah... the joy of having an older Wacom 8) :
Or just get Painter and adjust the pressure scale, for other programs you can correct it using that workaround for newer drivers.
I've always wondered why Wacom would remove this useful feature from the modern drivers, their software/driver department is what I would call a bunch of ******.
This tip is amazing. Thanks for posting the info.
Mac users can find this file under Users/User Name/Library/Preferences/com.wacom.wacomtablet.prefs. Just change the numbers as you would on PC then logout or restart your computer.
this works for all wacom tablets, as the 'wacom_tablet.dat' exists for all wacom drivers. follow the exact same steps.
Hi I located the files you helpfully directed me to but when I double click on it to adjust it it says that there is no default application to open the document. Any suggestions?
Sorry ignore previous - got it sorted
just search your C: drive using wacom_tablet, i can find it just fine.